Stereolithographic Fabrication of Alumina Ceramics from Aluminum Chloride-Containing Polymerizable Precursors

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

An approach has been proposed for preparing polymerizable precursors to alpha-alumina and aluminum oxynitride ceramics and using them in stereolithographic fabrication of aluminum-containing ceramics. With allowance for their homogeneity (optical transmission), photopolymerizability, and weight loss during thermolysis, three precursors based on aluminum chlorides (anhydrous and hexahydrate) and a basic aluminum chloride were chosen for characterization. We analyzed the behavior of the precursors during firing in an ammonia atmosphere for the preparation of oxynitride ceramics and during firing in air for the preparation of alpha-alumina ceramics from homogeneous precursors. Stereolithographic 3D printing of alpha-alumina ceramics was tested, in particular with the use of the proposed precursors in the form of photopolymerizable binders allowing the fraction of alumina in photosuspensions to be increased.

Sobre autores

D. Larionov

Faculty of Materials Science, Moscow State University, 119991, Moscow, Russia

Email: valery.putlayev@gmail.com
Россия, 119991, Москва, Ленинские горы, 1, с. 73

P. Evdokimov

Faculty of Materials Science, Moscow State University, 119991, Moscow, Russia; Faculty of Chemistry, Moscow State University, 119991, Moscow, Russia

Email: valery.putlayev@gmail.com
Россия, 119991, Москва, Ленинские горы, 1, с. 73; Россия, 119991, Москва, Ленинские горы, 1, с. 3

A. Garshev

Faculty of Materials Science, Moscow State University, 119991, Moscow, Russia; Faculty of Chemistry, Moscow State University, 119991, Moscow, Russia

Email: valery.putlayev@gmail.com
Россия, 119991, Москва, Ленинские горы, 1, с. 73; Россия, 119991, Москва, Ленинские горы, 1, с. 3

D. Kozlov

Faculty of Materials Science, Moscow State University, 119991, Moscow, Russia

Email: valery.putlayev@gmail.com
Россия, 119991, Москва, Ленинские горы, 1, с. 73

V. Putlyaev

Faculty of Materials Science, Moscow State University, 119991, Moscow, Russia; Faculty of Chemistry, Moscow State University, 119991, Moscow, Russia

Autor responsável pela correspondência
Email: valery.putlayev@gmail.com
Россия, 119991, Москва, Ленинские горы, 1, с. 73; Россия, 119991, Москва, Ленинские горы, 1, с. 3

Bibliografia

  1. Zocca A., Colombo P., Gomes C.M., Günster J. Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities // J. Am. Ceram. Soc. 2015. V. 98. № 7. P. 1983–2001. https://doi.org/10.1111/jace.13700
  2. Ievlev V.M., Putlyaev V.I., Safronova T.V., Evdokimov P.V. Additive Technologies for Making Highly Permeable Inorganic Materials with Tailored Morphological Architectonics for Medicine // Inorg. Mater. 2015. V. 51. № 13. P. 1295–1313. https://doi.org/10.1134/S0020168515130038
  3. Colombo P., Mera G., Riedel R., Sorarù G.D. Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics // J. Am. Ceram. Soc. 2010. V. 93. № 7. P. 1805–1837. https://doi.org/10.1111/j.1551-2916.2010.03876.x
  4. Liew L.A., Liu Y., Luo R., Cross T., An L., Bright V.M., Dunn M.L., Daily J.W., Raj R. Fabrication of SiCN MEMS by Photopolymerization of Preceramic Polymer // Sens. Actuators, A. 2002. V. 95. № 2–3. P. 120–134. https://doi.org/10.1109/MEMSYS.2002.984340
  5. Heimann R.B. Silicon Nitride, a Close to Ideal Ceramic Material for Medical Application // Ceramics. 2021. V. 4. P. 208–223. https://doi.org/10.3390/ceramics4020016
  6. Rey C., Combes C., Drouet C. Bioinert Ceramics: State-of-the-Art // Key Eng. Mater. 2017. V. 758. P. 3–13. doi: 10.4028/ href='www.scientific.net/KEM.758.3' target='_blank'>www.scientific.net/KEM.758.3
  7. Eckel Z.C., Zhou C., Martin J.H., Jacobsen A.J., Carter W.B., Schaedler T.A. Additive Manufacturing Of Polymer-Derived Ceramics // Science. 2016. V. 351. № 6268. P. 58–62. https://doi.org/10.1126/science.aad2688
  8. De Hazan Y., Penner D. SiC and SiOC Ceramic Articles Produced by Stereolithography of Acrylate Modified Polycarbosilane Systems // J. Eur. Ceram. Soc. 2017. V. 37. № 16. P. 5205–5212. https://doi.org/10.1016/j.jeurceramsoc.2017.03.021
  9. Новаков И.А., Радченко Ф.С. Наноразмерные алюмоксановые частицы-прекурсоры органо-неорганических гибридных полимерных композиций // Изв. ВолгГТУ. 2013. № 4 (107). С. 5–20.
  10. Стороженко П.А., Щербакова Г.И., Цирлин А.М., Муркина А.С., Варфоломеев М.С., Кузнецова М.Г., Полякова М.В., Трохаченкова О.П. Органоалкоксиалюмосиликаты и бескремнеземное связующее на их основе // Неорган. материалы. 2007. Т. 43. № 3. С. 373–382. https://doi.org/10.1134/S0002337X19100130
  11. He J., Avnir D., Zhang L. Sol–Gel Derived Alumina Glass: Mechanistic Study of Its Structural Evolution // Acta Mater. 2019. V. 174 P. 418–426. https://doi.org/10.1016/j.actamat.2019.05.062
  12. Baixia L., Yinkui L., Yi. L. Preparation of Aluminium Nitride from Organometallic/Polymeric Precursors // J. Mater. Chem. 1993. V. 3. № 2. P. 117–127. https://doi.org/10.1039/JM9930300117
  13. Jensen J.A. Organoaluminum Precursor Polymers for Aluminum Nitride Ceramics // Inorganic and Organometallic Polymers II. ACS Symposium Series, Ch. 32. Washington, DC: Am. Chem. Soc., 1994. P. 428–439. https://doi.org/10.1021/bk-1994-0572.ch032
  14. Naderi-beni B., Alizadeh A. Preparation of Single Phase AlON Powders Aided by the Nitridation of Sol-Gel-Derived Nanoparticles // Ceram. Int. 2019. V. 45. P. 7537–7543. https://doi.org/10.1016/j.ceramint.2019.01.047
  15. Ивичева С.Н., Овсянников Н.А., Лысенков А.С., Климашин А.А., Каргин Ю.Ф. Синтез оксонитридоалюмосиликатов золь-гель методом // Журн. неорган. химии. 2020. Т. 65. № 12. С. 1614–1625. https://doi.org/10.1134/S0036023620120050
  16. Орлов Н.К., Евдокимов П.В., Милькин П.А., Тихонов А.А., Тихонова С.А., Климашина Е.С., Зуев Д.М., Капитанова О.О., Путляев В.И. Синтез прекерамического прекурсора на основе органических солей алюминия для стереолитографической 3D-печати корундовой керамики // Перспективные материалы. 2021. № 4. С. 67–80. https://doi.org/10.30791/1028-978X-2021-4-67-80
  17. Chase M.W. NIST–JANAF Thermochemical Tables, Fourth Edition // J. Phys. Chem. Ref. Data. Monograph 9. 1998. P. 1–1951.
  18. Willems H.X., Hendrix M.M.R.M., Metselaar R., de With G. Thermodynamics of Alon I: Stability at Lower Temperatures // J. Eur. Ceram. Soc. 1992. V. 10. P. 327–337. https://doi.org/10.1016/0955-2219(92)90088-U
  19. Corbin N.D. Aluminum Oxynitride Spinel: a Review // J. Eur. Ceram. Soc. 1989. V. 5. P. 143–154. https://doi.org/10.1016/0955-2219(89)90030-7
  20. Kaufman L. Calculation of Quasibinary and Quasiternary Oxynitride Systems – III // Calphad. 1979. V. 3. P. 275–291.
  21. Валеев Д.В., Лайнер Ю.А., Самохин А.В., Синайский М.А., Михайлова А.Б., Куцев С.В., Гольдберг М.А. Физико-химические исследования процесса термогидролиза хлорида алюминия // Перспективные материалы. 2016. № 1. С. 64–73. https://doi.org/10.1134/S2075113316050269
  22. Tabary P., Servant C. Thermodynamic Reassessment of the AlN-A12O3 System // Calphad. 1999. V. 22. № 2. P. 179–201. https://doi.org/10.1016/S0364-5916(98)00023-6
  23. Becher P. Microstructural Design of Toughened Ceramics // J. Am. Ceram. Soc. 1991. V. 74. № 2. P. 255–269. https://doi.org/10.1111/j.1151-2916.1991.tb06872.x

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar
2.

Baixar (92KB)
Metadados
3.

Baixar (147KB)
Metadados
4.

Baixar (168KB)
Metadados
5.

Baixar (3MB)
Metadados
6.

Baixar (52KB)
Metadados
7.

Baixar (2MB)
Metadados

Declaração de direitos autorais © Д.С. Ларионов, П.В. Евдокимов, А.В. Гаршев, Д.А. Козлов, В.И. Путляев, 2023