Change in the free volume in amorphous Al88Ni10Y2 alloy under plastic deformation

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅或者付费存取

详细

The surface morphology and structure of the amorphous Al88Ni10Y2 alloy subjected to deformation by multiple cold rolling were studied using X-ray diffraction and scanning electron microscopy. It was shown that during plastic deformation, steps are formed on the surface of the amorphous alloy due to the emergence of shear bands on the surface. It was found that aluminum crystals are formed in the deformed alloy. The steps on the surface of the deformed alloy were analyzed using the images obtained by the scanning electron microscopy method. It was shown that the length of the steps remains approximately the same when examining the surface of different areas of the deformed alloy. An assessment was made of the change in the fraction of free volume in the studied alloy during plastic deformation. The applied methodology made it possible to assess the difference in the density of undeformed and deformed alloys of different compositions using electron microscopic images. Determining the change in free volume content in amorphous alloys subjected to plastic deformation is a key factor in studying the ways of forming amorphous-nanocrystalline structures with improved mechanical properties.

全文:

受限制的访问

作者简介

V. Chirkova

Yu.A. Osipyan Institute of Solid State Physics RAS

编辑信件的主要联系方式.
Email: valyffkin@issp.ac.ru
俄罗斯联邦, Chernogolovka

N. Volkov

Yu.A. Osipyan Institute of Solid State Physics RAS

Email: valyffkin@issp.ac.ru
俄罗斯联邦, Chernogolovka

G. Abrosimova

Yu.A. Osipyan Institute of Solid State Physics RAS

Email: valyffkin@issp.ac.ru
俄罗斯联邦, Chernogolovka

A. Aronin

Yu.A. Osipyan Institute of Solid State Physics RAS

Email: valyffkin@issp.ac.ru
俄罗斯联邦, Chernogolovka

参考

  1. Becker M., Kuball A., Ghavimi A., Adam B., Busch R., Gallino I., Balle F. // Materials. 2022. V. 15. № 21. P. 7673. https://www.doi.org/10.3390/ma15217673
  2. Gao M.H., Zhang S.D., Yang B.J., Qiu S., Wang H.W., Wang J.Q. // Appl. Surf. Sci. 2020. V. 530. P. 147211. https://www.doi.org/10.1016/j.apsusc.2020.147211
  3. Ming W., Guo X., Xu Y., Zhang G., Jiang Z., Li Y., Li X. // Ceram. Int. 2023. V. 49. № 2. P. 1585. https://www.doi.org/10.1016/j.ceramint.2022.10.349
  4. Meenuga S.R., Babu D.A., Majumdar B., Birru A.K., Guruvidyathri K., Raja M.M. // J. Magn. Magn. Mater. 2023. V. 584. P. 171087. https://www.doi.org/10.1016/j.jmmm.2023.171087
  5. Jin Y., Inoue A., Kong F.L., Zhu S.L., Al-Marzouki F., Greer A.L. // J. Alloys Compd. 2020. V. 832. P. 154997. https://www.doi.org/10.1016/j.jallcom.2020.154997
  6. Zhang C.Y., Zhu Z.W., Li S.T., Wang Y.Y., Li Z.K., Li H., Yuan G., Zhang H.F. // J. Mater. Sci. 2024. V. 181. P. 115. https://www.doi.org/10.1016/j.jmst.2023.09.022
  7. Люборский Ф.Е. Аморфные металлические сплавы. М.: Металлургия, 1987. 584 с.
  8. Greer A.L. // Science. 1995. V. 267. № 5206. P. 1947. https://www.doi.org/10.1126/science.267.5206.1947
  9. Turnbull D., Cohen M.H. // J. Chem. Phys. 1970. V. 52. № 6. P. 3038. https://www.doi.org/10.1063/1.1673434
  10. Astanin V., Gunderov D., Titov V., Asfandiyarov R. // Metals. 2022. V. 12. № 8. P. 1278. https://www.doi.org/10.3390/met12081278
  11. Chen Z.Q., Huang L., Wang F., Huang P., Lu T.J., Xu K.W. // Mater. Des. 2016. V. 109. P. 179. https://www.doi.org/10.1016/j.matdes.2016.07.069
  12. Doolittle A.K. // J. Appl. Phys. 1951. V. 22. № 12. P. 1471. https://www.doi.org/10.1063/1.1699894
  13. Ramachandrarao P., Cantor B., Cahn R.W. // J. Non. Cryst. Solids. 1977. V. 24. № 1. P. 109. https://www.doi.org/10.1016/0022-3093(77)90065-5
  14. Soshiroda T., Koiwa M., Masumoto T. // J. Non. Cryst. Solids. 1976. V. 22. № 1. P. 173. https://www.doi.org/10.1016/0022-3093(76)90017-X
  15. Lou Y., Liu X., Yang X., Ge Y., Zhao D., Wang H., Zhang L.-C., Liu Z. // Intermetallics. 2020. V. 118. P. 106687. https://www.doi.org/10.1016/j.intermet.2019.106687
  16. Spaepen F. // Acta Metall. 1977. V. 25. № 4. P. 407. https://www.doi.org/10.1016/0001-6160(77)90232-2
  17. Argon A.S. // Acta Metall. 1979. V. 27. № 1. P. 47. https://www.doi.org/10.1016/0001-6160(79)90055-5
  18. Greer A.L., Cheng Y.Q., Ma E. // Mater. Sci. Eng. R. 2013. V. 74. № 4. P. 71. https://www.doi.org/10.1016/j.mser.2013.04.001
  19. Rösner H., Peterlechner M., Kübel C., Schmidt V., Wilde G. // Ultramicroscopy. 2014. V. 142. P. 1. https://www.doi.org/10.1016/j.ultramic.2014.03.006
  20. Liu C., Roddatis V., Kenesei P., Maaß R. // Acta Mater. 2017. V. 140. P. 206. https://www.doi.org/10.1016/j.actamat.2017.08.032
  21. Чиркова В.В., Абросимова Г.Е., Першина Е.А., Волков Н.А., Аронин А.С. // Поверхность. Рентген. синхротр. и нейтрон. исслед. 2023. № 11. С. 16. https://www.doi.org/10.31857/S1028096023110080
  22. Tsai A.-P., Kamiyama T., Kawamura Y., Inoue A., Masumoto T. // Acta Mater. 1997. V. 45. № 4. P. 1477. https://www.doi.org/10.1016/S1359-6454(96)00268-6
  23. Anghelus A., Avettand-Fènoël M.-N., Cordier C., Taillard R. // J. Alloys Compd. 2015. V. 651. V. 454. https://www.doi.org/10.1016/j.jallcom.2015.08.102
  24. Park J.S., Lim H.K., Kim J.-H., Chang H.J., Kim W.T., Kim D.H., Fleury E. // J. Non-Cryst. Solids. 2005. V. 351. № 24-26. P. 2142. https://www.doi.org/10.1016/J.JNONCRYSOL. 2005.04.070
  25. Hebert R.J., Perepezko J.H., Rösner H., Wilde G. // Beilstein J. Nanotechnol. 2016. V. 7. № 1. P. 1428. https://www.doi.org/10.3762/bjnano.7.134
  26. Аронин А.С., Волков Н.А., Першина Е.А. // Поверхность. Рентген. синхротр. и нейтрон. исслед. 2024. № 1. C. 33. https://www.doi.org/10.31857/S1028096024010054
  27. Aronin A.S., Louzguine-Luzgin D.V. // Mech. Mater. 2017. V. 113. P. 19. https://www.doi.org/10.1016/j.mechmat.2017.07.007
  28. Gunderov D., Astanin V., Churakova A., Sitdikov V., Ubyivovk E., Islamov A., Wang J.T. // Metals. 2020. V. 10. № 11. P. 1433. https://www.doi.org/10.3390/met10111433
  29. Абросимова Г.Е., Астанин В.В., Волков Н.А., Гундеров Д.В., Постновa Е.Ю., Аронин А.С. // ФММ. 2023. T. 124. № 7. C. 622. https://www.doi.org/10.31857/S0015323023600521
  30. He J., Kaban I., Mattern N., Song K., Sun B., Zhao J., Kim D.H., Eckert J., Greer A.L. // Sci. Reports. 2016. V. 6. P. 25832. https://www.doi.org/10.1038/srep25832

补充文件

附件文件
动作
1. JATS XML
下载
2. Fig. 1. Scheme of studying the surface of a deformed alloy using scanning electron microscopy; n is the number of images obtained.

下载 (7KB)
索引源数据
3. Fig. 2. X-ray diffraction pattern of an amorphous alloy before deformation.

下载 (11KB)
索引源数据
4. Fig. 3. X-ray diffraction pattern of the alloy after deformation indicating the reflection indices from aluminum crystals.

下载 (13KB)
索引源数据
5. Fig. 4. Examples of images of the surface of a deformed alloy: a section near the edge (a) and in the middle of the sample (b).

下载 (58KB)
索引源数据
6. Fig. 5. Examples of images of the surface of a deformed alloy with highlighted steps: a section near the edge (a) and in the middle of the sample (b).

下载 (74KB)
索引源数据
7. Fig. 6. Dependence of the total length of steps l on the distance from the edge of the alloy sample x after deformation.

下载 (11KB)
索引源数据

版权所有 © Russian Academy of Sciences, 2025