电邮这篇文章 Features of the influence of alternating elastic-plastic deformation on the mechanical properties of metallic materials
- 作者: Shelest A.E.1, Rogachev S.O.1,2, Yusupov V.S.1, Andreev V.A.1, Karelin R.D.1, Bazhenov V.E.2
-
隶属关系:
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- National University of Science and Technology MISIS
- 期: 编号 3 (2025)
- 页面: 97-103
- 栏目: Articles
- URL: https://kazanmedjournal.ru/0869-5733/article/view/688205
- DOI: https://doi.org/10.31857/S08695733250397103
- ID: 688205
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
详细
The study of the effect of elastic-plastic alternating deformation on the mechanical properties of magnesium strips and low-carbon steel strips after processing on a roller straightening machine was carried out. The application of the strengthening process in 1 and 3 passes does not change the geometry of the strips. The yield strength of steel increases and the yield strength of magnesium decreases; at the same time, the yield plateau disappears on the tensile curve of steel samples, and a region similar to the easy slip stage in a single crystal appears on the tensile curve of magnesium samples after the elasticity stage. For an integral assessment of the effect of alternating deformation on the material and to determine its resistance to deformation, flow curves were constructed using the Nadai model.
全文:
作者简介
A. Shelest
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
编辑信件的主要联系方式.
Email: shelest99@mail.ru
俄罗斯联邦, Moscow
S. Rogachev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; National University of Science and Technology MISIS
Email: shelest99@mail.ru
俄罗斯联邦, Moscow; Moscow
V. Yusupov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: shelest99@mail.ru
俄罗斯联邦, Moscow
V. Andreev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: shelest99@mail.ru
俄罗斯联邦, Moscow
R. Karelin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: rdkarelin@gmail.com
俄罗斯联邦, Moscow
V. Bazhenov
National University of Science and Technology MISIS
Email: shelest99@mail.ru
俄罗斯联邦, Moscow
参考
- Шелест, А.Е. Исследование влияния условий правки полос и лент из металлических материалов на их свойства, геометрические и деформационные параметры процесса знакопеременного упругопластического изгиба / А.Е. Шелест, В.С. Юсупов, С.О. Рогачев, Д.В. Тен, В.А. Андреев, Р.Д. Карелин // Металлы. 2024. №1. С.83–91. – (Shelest, A.E. Investigation of the influence of dressing conditions of strips and strips from metallic materials on their properties, geometric and deformation parameters of the process of alternating elastic-plastic bending / A.E. Shelest, V.S. Yusupov, S.O. Rogachev, D.V. Ten, V.A. Andreev, R.D. Karelin // Metally. 2024. №1. P.83–91.)
- Ramalingam, V.V. Research and development in magnesium alloys for industrial and biomedical applications : A review / V.V. Ramalingam, P. Ramasamy, M.D. Kovukkal [et al.] // Met. Mater. Int. 2020. V.26. P.409–430. https://doi.org/10.1007/s12540-019-00346-8
- http://stanko-group.net/katalog/stanki-dlya-obrabotki-lista/ustanovki-pravki-lista/precizionnyy-pravilnyy-stanok-ecomaster-2/
- Митропольский, А.К. Техника статистических вычислений / А.К. Митропольский. – М. : Наука, 1971. 576 с. – (Mitropol’skij A.K. Statistical computing techniques / A.K. Mitropol’skij. – M. : Nauka, 1971. 576 p.)
- ГОСТ 19903–2015. Прокат листовой горячекатаный. Сортамент. – (GOST 19903–2015. Hot-rolled sheet steel. Assortment.)
- ГОСТ 19904–90. Прокат листовой холоднокатаный. Сортамент. – (GOST 19904–90. Cold-rolled sheet steel. Assortment.)
- Зильберг, Ю.В. Влияние знакопеременного изгиба на структуру и свойства полос магниевого сплава AZ31 / Ю.В. Зильберг, Ф.В. Бах, Д. Борман, М. Родман, М. Шапер, М. Хелке // МиТОМ. 2009. №4. С.20–25. – (Zil’berg, Yu.V. Effect of alternating bending on structure and properties of AZ31 magnesium alloy strips / Yu.V. Zil’berg, F.V. Bah, D. Borman, M. Rodman, M.S. Haper, M. Helke // Metallurgy and heat treatment of metals. 2009. №4. P.20–25.)
- ГОСТ 14957–76. Сплавы магниевые деформируемые. Марки. – (GOST 14957–76. Magnesium deformable alloys. Grades.)
- ГОСТ 1497–84. Металлы. Методы испытаний на растяжение. – (GOST 1497–84. Metals. Tensile test methods.)
- ИТС 27–2021. Информационно-технический справочник по наилучшим доступным технологиям. Производство изделий дальнейшего передела черных металлов (Утвержден Приказом Росстандарта от 22.12.2021, № 2961). – (ITS 27-2021. Information and Technical Guide to the Best Available Technologies. Production of products of further processing of ferrous metals (Approved by the Order of Rosstandart from 22.12.2021, № 2961).)
补充文件
